Sealcoating is a great way to protect your asphalt and extend its life. It is a simple process that should be carried out every three years or so.

It starts by clearing the paved surface of any visible debris. This step is essential as the sealer will not stick to a dirty surface. Next, cardboard is used to protect curbs, sidewalks, fire hydrants, and garage doors from getting sealer on them. Visit https://www.rochesternysealcoating.com/ to learn more.

Sealcoating is environmentally friendly, primarily because it extends asphalt pavement life by protecting it from oxidation. It also provides a layer of protection that prevents water, petroleum, chemicals and automotive fluids from penetrating and damaging the surface of the asphalt. The result is a smooth, black surface that looks like new and is more resistant to weather and traffic damage.

The first step in the sealcoating process is to block off the area that will be treated. This includes any driveways, parking lots and walkways that may be affected by the sealing process. A tarp is often placed over the area to be sealed to protect it from rain and debris. Pavement that is soaked by water can become brittle and eventually crack. It is best to wait until after the sealcoating has cured before allowing people to walk on the pavement.

Using a biobased sealer is an alternative to coal tar products, which have high concentrations of polycyclic aromatic hydrocarbons (PAH’s). These PAH’s are released into the environment when coal tar is heated, burned or melted. These toxins have been shown to have harmful effects on fish and wildlife that consume them. A good way to avoid these contaminants is by only hiring a company that uses a USDA certified biobased sealcoat.

In addition to its environmental benefits, BioSealcoat is more cost effective than traditional coal tar sealers. It also contains renewable materials such as soybean oil, which helps reduce its carbon footprint. In rural areas where budgets are limited, the potential savings from this eco-friendly product are significant and can help extend the lifespan of roadways.

When a driveway or parking lot is left untreated, it will deteriorate rapidly due to exposure to the elements. Sealcoating is a cost-effective solution that can extend the life of asphalt by filling in cracks and adding a protective barrier against UV rays, water, snow and chemical penetration. It is a great way to save money over time and protect your investment.

Sealcoating is an affordable way to improve the look of your property and increase its value. In addition, it helps preserve your investment by preventing costly repairs. By using a quality material and scheduling regular maintenance, you can prolong the life of your pavement and save money over the long term.

Durable

Sealcoating is a thin liquid mixture that is spread onto asphalt surfaces, creating a layer of protection. It protects pavement from oil, UV ray damage, and other environmental contaminants. It also helps prevent cracks from getting worse, and it gives the surface a rich black finish that beautifies the area. A regularly scheduled sealcoating program can double the lifespan of your asphalt pavement, saving you money on costly repairs down the road.

Seal coating is typically performed from spring through fall, as the process requires warm temperatures and no rain afterward for proper curing. The area to be sealed must be closed off with cones and barricades, and it’s important to ensure all vehicles are removed from the area during and afterward. Once the surface is dry, a second coat is applied to create a solid one-eighth inch coating. It is then hand squeegeed to provide clean edges and extra sealer, and a walk-through is conducted to ensure that the quality of work meets our standards.

The type of sealer used is a vital factor in the durability of the finished product. Different options are available, including refined coal tar, asphalt emulsions, and rubber polymers. Each type offers advantages and disadvantages, and it’s a good idea to discuss your commercial property’s needs with a professional contractor who can offer recommendations. Coal tar sealers are generally more durable, but they are less eco-friendly than asphalt emulsions and don’t offer the same level of resistance against chemicals and oils.

Selecting a sealant tailored to your property’s specific chemical exposure and traffic levels will help extend the life of your pavement. Some sealants are also banned in certain areas due to their high levels of polycyclic aromatic hydrocarbons, which are known to cause health issues if ingested by water-dwelling animals and humans.

When choosing a sealcoat, look for ingredients that are tested and approved by reputable organizations. The most crucial ingredient is the binder, which holds all of the other ingredients together and provides the asphalt surface with its dark appearance. Other ingredients include fillers and sand, which add strength, and surfactants, which allow the material to adhere to pavement.

Easy to Maintain

Sealcoating is a preventative maintenance technique that keeps asphalt looking like new and reduces the amount of damage caused by weather. It also helps keep the surface cooler and easier to clean. A fresh, black appearance helps boost curb appeal and make your property look well-maintained. It’s also a lot easier to sweep and remove trash from smooth, uncracked pavement than it is from cracking and pothole-ridden asphalt.

Using professional quality equipment and application methods is essential to getting the best results from your asphalt paving. It’s a great way to improve the appearance of your driveway or parking lot while protecting your investment.

Before the sealcoat is applied, the area must be blocked off and thoroughly cleaned. This can be done with outside tools such as brooms, blowers, or air compressors. The area must be completely free of debris such as leaves, dirt, mulch, and other debris. Any potholes, ruts, or depressions in the asphalt must be filled and patched before applying the sealcoat. It’s important to fix any damaged asphalt before sealing it, as this will save you time and money in the long run.

After the sealcoat has been applied, it will take about 24 hours to dry. During this time, it’s important to avoid walking or driving on the surface until it is fully cured. You may want to consider using a quick-drying formula for your sealer, as these tend to dry much faster. This can be a great option for busy businesses, as it will allow them to get their customers in and out faster.

During the sealcoating process, it’s important to use the correct amount of product. Over-slathering sealant can cause premature cracking, which will require more frequent repairs. Using the right amount of product will ensure that your asphalt will last longer and remain in good condition for years to come.

If you’re interested in starting your own sealcoating business, it’s a good idea to research the industry and develop a business plan. You will also need to secure funding and obtain the necessary licenses and permits. It’s also a good idea to invest in route planning and optimization software, such as OptimoRoute, to streamline work scheduling and improve productivity. This will help you lower costs and improve efficiency so that your new business can thrive.

Affordable

Sealcoating is a cost-effective way to extend the life of your asphalt pavement. It provides a protective layer that shields the asphalt from harmful UV rays, water and chemical penetration, which can damage and weaken the surface. This prevents cracking and deterioration of the asphalt, and it saves time and money on costly repairs in the future. You can use a sealcoating calculator to determine the approximate costs based on the size of your driveway, parking lot, or other paved surface.

In addition, a well-maintained asphalt surface will look attractive to prospective customers or tenants, which can boost your property value. Moreover, it will be easier to clean and maintain because oil and other debris will not stick to the surface. Sealcoating is also less expensive than hiring a professional to remove and replace the damaged asphalt. Hence, it is a wise investment for property owners and commercial businesses.

A professional sealcoating contractor will have the right equipment for the job, which can help them complete the project faster and more efficiently. This is important because it can cut down on labor costs. This can be especially true for large jobs, such as a commercial parking lot. A contractor can save money by using a sprayer to apply the sealant, which allows them to cover larger areas in a shorter amount of time.

The price of the materials is another factor that influences the cost of sealcoating. The type of sealant used will affect the price, as will its quality. A higher-quality sealant may be more expensive, but it will last longer and provide better protection. It is also worth noting that the cost of raw materials can fluctuate, depending on crude oil prices.

When choosing a sealcoating company, it is advisable to compare the costs and benefits of each option. Some companies offer free estimates and consultations. These are good ways to assess the quality of a company’s work and decide whether or not it is worth hiring. It is also a good idea to read customer reviews.

If you are a DIY person, there are several affordable tools and supplies that can be used for sealcoating. However, it is important to know that this task requires extensive preparation and experience. If you are a newcomer to this process, it is best to hire a professional for the job. Otherwise, you may end up spending more money on re-doing the job due to errors made during the cleaning and preparation process.